What are the settings for laser cutting high bulk artboard?

Dec 05, 2025

Leave a message

Olivia Davis
Olivia Davis
Olivia is in charge of environmental protection affairs at Freeway. She ensures that the company's production complies with environmental regulations, given the ISO14001 environmental system certification of the partner paper mills. Her efforts are in line with the company's sustainable development goals.

As a supplier of high bulk artboard, I've witnessed firsthand the growing demand for this versatile material in various industries, from packaging to advertising. Laser cutting has emerged as a popular method for shaping high bulk artboard due to its precision, speed, and ability to create intricate designs. However, achieving optimal results with laser cutting high bulk artboard requires careful consideration of several settings. In this blog post, I'll share some insights into the key settings for laser cutting high bulk artboard and how they can impact the final outcome.

Power

The power setting on a laser cutter determines the intensity of the laser beam. When cutting high bulk artboard, it's crucial to find the right balance between power and speed. Too much power can cause the artboard to burn or char, while too little power may result in incomplete cuts. The ideal power setting will depend on the thickness and density of the artboard, as well as the type of laser cutter being used.

For thinner high bulk artboards, a lower power setting may be sufficient. For example, if you're cutting a 200gsm High Bulk Art Card Gloss, you might start with a power setting of around 30 - 40%. As the thickness of the artboard increases, you'll need to increase the power accordingly. A 500gsm High Bulk Coated Two Sides Art Board may require a power setting of 60 - 80%. It's always a good idea to perform test cuts on a scrap piece of artboard to fine - tune the power setting before cutting your actual project.

Speed

The speed at which the laser cutter moves across the artboard is another critical factor. A faster speed can increase productivity, but it may also lead to incomplete cuts if the power is not adjusted properly. Conversely, a slower speed can ensure cleaner cuts but may take longer to complete the job.

2 Sides Coated Art Paper GlossHigh Bulk Art Card Gloss

When cutting high bulk artboard, a slower speed is generally recommended to allow the laser enough time to penetrate the material fully. For a standard 300gsm 2 Sides Coated Art Paper Gloss, a speed of around 10 - 20% (depending on the power setting) might be appropriate. If you're using a more powerful laser cutter, you may be able to increase the speed slightly, but it's important to monitor the quality of the cuts closely.

Frequency

The frequency of the laser refers to how often the laser pulses. A higher frequency can result in a smoother cut, especially when working with detailed or intricate designs. However, it can also increase the heat generated, which may cause the artboard to warp or burn.

For high bulk artboard, a medium frequency setting is often a good starting point. A frequency of around 500 - 1000 Hz can provide a good balance between cut quality and heat generation. If you're cutting simple shapes, you may be able to use a lower frequency, while more complex designs may require a higher frequency.

Focus

Proper focus is essential for achieving clean and precise cuts with a laser cutter. The focus determines the point at which the laser beam is most concentrated. If the focus is too high or too low, the cut may be uneven or incomplete.

Most laser cutters have a focus adjustment mechanism. To set the focus correctly for high bulk artboard, you can use a focus gauge or perform test cuts at different focus levels. The ideal focus will depend on the thickness of the artboard. Generally, for thinner artboards, the focus should be closer to the surface, while for thicker artboards, the focus may need to be adjusted deeper into the material.

Air Assist

Air assist is a feature that blows compressed air onto the cutting area during the laser cutting process. It serves several important functions when cutting high bulk artboard. Firstly, it helps to remove debris and smoke from the cutting path, which can improve the visibility of the cut and prevent the artboard from getting dirty. Secondly, it can cool the material, reducing the risk of burning or warping.

When using air assist for high bulk artboard, a moderate air pressure is usually sufficient. Too much air pressure can cause the artboard to move or vibrate, affecting the accuracy of the cut. A pressure of around 5 - 10 PSI is a good starting point, but you may need to adjust it based on the specific requirements of your project.

Impact of Material Quality

The quality of the high bulk artboard also plays a significant role in the laser cutting process. Higher - quality artboards are generally more consistent in terms of thickness, density, and coating, which can make them easier to cut. They are less likely to have defects that could cause uneven cuts or burning.

As a high bulk artboard supplier, I always recommend using high - quality materials for laser cutting projects. Our High Bulk Art Card Gloss, 2 Sides Coated Art Paper Gloss, and High Bulk Coated Two Sides Art Board are carefully manufactured to ensure uniform properties, which can lead to better results when laser cutting.

Troubleshooting Common Issues

Even with the right settings, you may encounter some issues when laser cutting high bulk artboard. Here are some common problems and their solutions:

  • Burning or charring: If the artboard is burning or charring, it could be due to too much power, too slow a speed, or insufficient air assist. Try reducing the power, increasing the speed, or adjusting the air pressure.
  • Incomplete cuts: Incomplete cuts may be caused by too little power, too fast a speed, or incorrect focus. Increase the power, decrease the speed, and check the focus setting.
  • Uneven cuts: Uneven cuts can result from an uneven surface of the artboard, incorrect focus, or a misaligned laser cutter. Make sure the artboard is flat and properly secured, and check the focus and alignment of the laser cutter.

Conclusion

Laser cutting high bulk artboard can be a highly effective way to create precise and detailed designs. By carefully adjusting the power, speed, frequency, focus, and air assist settings, and using high - quality artboard, you can achieve excellent results. Whether you're a small - scale crafter or a large - scale manufacturer, understanding these settings is essential for successful laser cutting projects.

If you're interested in purchasing high - quality high bulk artboard for your laser cutting needs, please don't hesitate to contact us. We're here to provide you with the best products and support to help you bring your creative ideas to life.

References

  • Laser Cutting Handbook: A Comprehensive Guide to Laser Cutting Technology
  • Industry research on the impact of material properties on laser cutting performance.
Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!